text
stringlengths 16
69.9k
|
|---|
N. & M. – A Couple Session in Cape Town
N. & M. – A Couple Session in Cape Town
Every time I photograph a new session I feel like I am starting anew. It’s a whole new world in front of me and a whole new story to tell. This is especially true when I photograph in a country which is completely new to me. I am committed to writing a whole blog post about our recent trip to South Africa, and how I feel deeply enriched by it. This time around, I want to show a short but meaningful segment from it.
On a hot afternoon in February – yes, it was Summer there! – I got to take a walk in Downtown Cape Town with this couple. I had only exchanged a few messages with them and, once again, I was impressed at how photography brings to my path people who somewhat share something with me. As most of my couples, Nujeran and Matthew claimed they were extremely new to this and camera shy. And like pretty much all of my couples, they look absolutely incredible in these photos… But you can judge for yourself in a bit.
I honestly feel so lucky I got the opportunity to photograph them in their beautiful hometown. As true locals, they provided me with the opportunity to learn a bit more about Cape Town. Chatting with them made me feel a stronger connection with the place. The more I travel, the more I realise how important it is to establish a real connection with the place I am visiting. May it be through the language or through the history (I have been reading Mandela’s autobiography since then) or even better through the conversations with people, as in this case.
Thank you guys, I hope our paths will cross again soon and you’ll love the photos as much as I do.
If you’re planning a destination wedding in beautiful South Africa or knows someone who is, please feel free to get in touchwith me. I would love to tell your story.
|
Planning the duration of accrual and follow-up for clinical trials.
In clinical trials, the duration of accrual and follow-up are chosen to ensure an adequate power to detect a specified difference at a given level of significance, but appropriate choices for durations of accrual and follow-up are not unique. Methods of determining appropriate combinations for the accrual and follow-up periods are given and the unique cost effective choice of accrual and follow-up periods is presented. The accrual period can be substantially decreased by including a short follow-up period. The unique cost effective duration of follow-up depends on the ratio of the cost of accruing patients to the cost of following patients for end point determination.
|
In vivo analyses of cytoplasmic transport and cytoskeletal organization during Drosophila oogenesis: characterization of a multi-step anterior localization pathway.
Anterior patterning of the Drosophila embryo depends on localization of bicoid (bcd) mRNA to the anterior pole of the developing oocyte, and bcd mRNA localization requires both the exuperantia (exu) gene and an intact microtubule cytoskeleton. To gain insight into the mechanism of anterior patterning, we have used time lapse laser scanning confocal microscopy to analyze transport of particles containing a Green Fluorescent Protein-Exu fusion (GFP-Exu), and to directly image microtubule organization in vivo. Our observations indicate that microtubules are required for three forms of particle movement within the nurse cells, while transport through the ring canals linking the nurse cells and oocyte appears to be independent of both microtubules and actin filaments. As particles enter the oocyte, a final microtubule-dependent step directs movement to the oocyte cortex. However, our observations and previous studies suggest that the polarity of the oocyte microtubule network is not in itself sufficient to generate anterior asymmetry, and that additional factors are required to restrict morphogens to the anterior pole. Based on these observations, we propose a multi-step anterior localization pathway.
|
"FROM FIRST TO LAST" Think you know everything there is to know about the original X-Men? Think again! Something happened to Cyclops, Marvel Girl, Beast, Angel, Iceman and Professor X years ago, a ...
more
"FROM FIRST TO LAST" Think you know everything there is to know about the original X-Men? Think again! Something happened to Cyclops, Marvel Girl, Beast, Angel, Iceman and Professor X years ago, a secret so horrible that it has been locked away in the dark corner of Cyclops' mind until today. What crisis strikes in the present that calls upon memories of the past? Witness the astonishing debut of the Evolutionaries! Taking the lead for a few issues is famed X-Men writer CHRIS YOST (X-FORCE) and with all this danger, he's lucky to have regular X-MEN artist PACO MEDINA and DALIBOR TALAJIC (PUNISHER) along for the ride.
more
|
Virus complement evasion strategies.
The immune system has a variety of tools at its disposal to combat virus infections. These can be subdivided roughly into two categories: 'first line defence', consisting of the non-specific, innate immune system, and 'adaptive immune response', acquired over time following virus infection or vaccination. During evolution, viruses have developed numerous, and often very ingenious, strategies to counteract efficient recognition of virions or virus-infected cells by both innate and adaptive immunity. This review will focus on the different strategies that viruses use to avoid recognition by one of the components of the immune system: the complement system. Complement evasion is of particular importance for viruses, since complement activation is a crucial component of innate immunity (alternative and mannan-binding lectin activation pathway) as well as of adaptive immunity (classical, antibody-dependent complement activation).
|
O people of the Scripture (Jews and Christians)! Do not exceed the limits in your religion, nor say of Allah aught but the truth. The Messiah 'Iesa (Jesus), son of Maryam (Mary), was (no more than) a Messenger of Allah and His Word, ("Be!" - and he was) which He bestowed on Maryam (Mary) and a spirit (Ruh) created by Him; so believe in Allah and His Messengers. Say not: "Three (trinity)!" Cease! (it is) better for you. For Allah is (the only) One Ilah (God), Glory be to Him (Far Exalted is He) above having a son. To Him belongs all that is in the heavens and all that is in the earth. And Allah is All-Sufficient as a Disposer of affairs.
No Copyright Notice: Copy freely. Modify freely. Distribute freely. Develop a mirror. Develop multiple mirrors. Incorporate it into your website. Make corrections. Distribute the zip file on file sharing networks. Create pdf files that are easy to print and distribute them. Make an eBook. Insert audio clips into the text. Develop a software program for the iPhone. Use your imagination. You have more than our permission, you have our encouragement. No restrictions to spread words of Allah.
|
[Capillary hemangioma of the retina in cases of von Hippel-Lindau syndrome. New therapeutic directions].
Thermal photocoagulation of small peripheral angiomas is the treatment of choice for capillary hemangiomas in patients with von Hippel-Lindau disease. Larger peripheral angiomas are better treated with beta-ray brachytherapy resulting in improved results in terms of local tumor control and the side effects of treatment. Photodynamic treatment is an alternative option in the management of capillary hemangiomas of the retina. Further improvement of the treatment results of photodynamic therapy may be achieved by combination with intravitreal drugs. External beam radiation using either stereotactic techniques or proton radiation must be considered as experimental. The treatment of juxtapapillary angiomas is still a therapeutic dilemma. Vitreoretinal surgery should be confined to advanced stages with tractional detachment or when no other treatment option is available to salvage the eye.
|
The Markets Unplugged
“You can’t put technology in a box,” said Reena Aggarwal, a professor specializing in market structure at Georgetown University. “You can’t say you’re not going to allow it happen. Sometimes the use of technology gets pushed too close to the edge. But the option isn’t banning it.”
The distinctive Executive Master’s in Leadership Program is designed to help executives advance their leadership skills and gain a deeper understanding of management strategy. The program integrates practical management skills and advanced leadership theory to enable executives to effect change within their organizations. Students learn how to anticipate how the future is likely to unfold, identify an organization’s desired position in that future, implement steps to place the organization at the forefront, and influence others to join them in advancing toward successful outcomes.
|
Administration officials meet to develop climate strategy
Trump administration officials huddled at the White House on Wednesday in a bid to chart a more cohesive energy and environmental policy strategy, including a game plan for communicating its position on climate change, according to three people familiar with the meeting.
|
In recent years, radiation-emitting devices have been widely used for an increasing number of purposes. All of such radiation-emitting devices include an envelope, an enclosed gas, and a pair of electrodes between which an electron flow is established.
Those skilled in the art are familiar with the operation of such devices, and it is not necessary to recite here operational details which have little bearing on this invention. It suffices to note that when an electron flow is established between electrodes, electrons strike certain atoms, such as mercury, and raise the energy level of another electron in the atom. When this electron (e.g., in the mercury atom) returns to its normal state, a ray of ultraviolet energy is released.
Such emissions are used for various purposes, including: lighting, by exciting phosphors as in fluorescent lamps; treating flowing liquids, such as water; and initiating laser discharges. One application to which this invention is particularly relevant is the treatment of flowing liquids.
This invention deals primarily with structural aspects of such radiation-emitting devices.
Many variations have been made in radiation-emitting apparatus, including variations in the gases, in gas pressures, in various devices for creating conditions necessary for radiation discharge, and in mounting structures for such devices, to name just a few. Some variations have been made in the size and shape of gas-containing envelopes.
The dominant shape of radiation-emitting envelopes has been cylindrical. Variations have dealt primarily with such things as doubling back the envelope to increase the length of the electron path for a single electron discharge and deforming portions of the envelope to create a more tortuous electron path for various purposes. In most cases, however, the common cylindrical envelope shape has been used in one way or another.
There are a number of problems and disadvantages with radiation-emitting devices of the prior art. Some of these will be briefly mentioned.
In many devices of the prior art, portions of the envelope volume have a sparsity of active fluorescing sites. And there is too great a degree of radiation reabsorption by the gas within envelopes of the prior art.
Prior art devices have some disadvantages relating to a failure to efficiently apply emitted radiation on a material to be irradiated, particularly flowable materials. Regions of flowing material are often too remote from the radiation source to be effectively treated. The law of inverse squares, in many structures for fluid treatment by radiation emitted outwardly through a cylindrical wall, creates areas of unacceptable exposure. And, passage of a fluid to be treated through an array of cylindrical radiation-emitting tubes often creates turbulence which is a negative factor on irradiation effectiveness.
The envelope structures of the prior art have other problems which are related to envelope materials. The standard cylindrical envelope, in order to use high-pressure gases as is often desirable t increase radiation output, require quartz envelope cylinders which are extremely thick, in order to provide sufficient strength. That is because quartz and similar radiation-transmissive materials, while they function well under compression (that is, pressure applied to a convex surface) do not withstand tension (that is, pressure applied to a concave surface) very well.
Finally, envelopes of prior art radiation-emitting devices are not easily adaptable to meet the varying requirements of important radiation-emitting applications. There is a need for envelopes and envelope concepts which can be adapted and engineered to better serve important practical needs.
There is a need for improved envelope devices which can increase efficiency of radiation emission, and for improved devices maximizing the number of active fluorescing sites within the envelope. More specifically, a need exists for an improved radiation-emitting envelope which reduces the reabsorption of radiation occurring within the envelope volume. There is a need for an envelope which decreases the path length that radiation must travel before leaving the envelope, while at the same time directing the radiation more specifically toward an exterior target than is the case with the standard cylindrical envelope.
Another significant need is to provide envelope structures which are more suitable for certain specific purposes than the current cylindrical envelopes. There is a need for radiation-emitting envelopes which apply radiation more effectively to materials to be irradiated, particularly fluid streams, as in water purification. There is a need for envelopes which can minimize the turbulence in a stream of fluid passing them for irradiation.
There is a need for envelope structures which can contain high-pressure gas and yet not require thick and expensive radiation-transmissive members. Also there is a need for envelopes structures which can be made using materials which may be formed as required to achieve various purposes. There is a need for a radiation-emitting envelope which can eliminate the need for a separate holder.
There is a need for improved radiation-emitting envelopes which lend themselves to easy fabrication and maintenance, are simple to install and efficient in operation.
|
Brazos District Training
Training is an important part of learning to become an effective leader. Trained leaders impact the quality of programs, leader tenure, youth tenure, and a whole lot more. A trained leader is better prepared to make the Scouting program all it can be! What to Bring to Training
|
Q:
JS/React multiple cookies
ok, so I guess I'm missing something very simple here, but can't manage to store more than one cookie with this function:
function safe_item(name) {
document.cookie = 'item name:' + name;
}
It works exactly as expected, but when a new cookie is created, the previous one just disappears :/
A:
That's because document.cookie only accepts a single string as value;
So, instead of document.cookie = 'item name:' + name;, do this document.cookie += 'item name:' + name;
|
closet color wheel order for clothes schemes pictures
Organizing colors in order color coordinated closet scheme how to organize clothes drawers i get all outfits ready for the week on sunday by time im heading each night too tired and. Color coordinated closet order of colors to organize scheme home decor for clothes storage vintage walk in ideas with bright colorization fundamentals and furniture design organizing.
Best dream closets and wardrobes images on pinterest closet color wheel how to coordinate your clothes in ideas dresser cabinets order of colors organize home decor scheme bedroom. Closet storage elegant black walk in wardrobe color declutter clothes scheme and furnitures ideas design how to organize your small organizing colors order home decor guide by coordinate.
|
Mother! Review
Mother! is not a film that cn be described in just one word or even one cohesive description. It's too shocking and bizarre to be fully conveyed in words. It's too full of competing messages and meta-narratives that to definitively state what it's actually about would be a borderline impossiblity. It has so many twists and gut wrenching surprises that to say anything more about it other than "Go see it" would be doing the potential audience a disservice to their viewing experience. This is a film overflowing with symbolism, allegories and other overlapping stories and is likely to be a movie experience you'll never have again.
For the record, the story is of Jenner Lawrence's unnamed heroine (Mother) as the much younger wife of an aging poet played by Javier Bardem. Both of them are living in a secluded cottage in the middle of the woods with the Poet looking to reinvigorate his creative juices while Mother fixes up the dilapidated house. Suddenly, people begin to come to their house, starting with a husband and wife duo of obsessed fans of the Poet's earlier work. There's something off about them. They're subtly weird in different ways and it starts to get really uncomfortable when they just won't leave. Then other people start to show up and they too refuse to leave. From that point on, it's one weird thing after another, a lot of really on the nose, some of it unexplained, but it'll give you a lot to talk about once you leave the theater.
Make no mistake: Mother! is not a movie to be enjoyed or watched so much as experienced and analyzed, which, if I were to guess, was writer/director Darren Aronofsky's intent from the beginning. He has poured into it every element of his past filmography- from his love of body horror, to his tendency to make on-the-noes allegories for religion to his preference for oppressed female protagonists into some kind of psychotic, self-aware, knowingly pretentious artistic thesis statement that not only intends to shock you, but also give you a lot to digest. The best description I've heard for this movie in terms of tone and story structure is that it's more like cinematic poetry than any sort of narrative, which I think was intentional given the meta-narrative woven into the film from the beginning.
However, beyond the dozens of deeper meanings and obvious allegories the raw, superficial experience is one of the most intense you'll probably have with a film this decade, at least. It might not be as existentially heart breaking as Requiem for a Dream (but then what is?), but in terms of nail-biting tension, ever-building chaos and supernatural horror Mother! is the best there is. The third act is the stuff of your most nightmarish fever dreams, packed to the brim with horrifying visuals, chaotic violence, dark absurdist satire and capped off with a final shot that I was kind of expecting, but never thought I was actually going to get.
Mother! is a movie that I can't actually believe exists; it's so psychotic and takes so many risks that I'm surprised a studio signed off on it. However, I'm so grateful for the fact that it did get made. In this age where studios are so concerned with pleased the immediate superficial desires of their audience, auteur filmmaking is all but dead and risk taking is frowned upon as some kind of sacrilege, Aronofsky drops in with all the confidence of somebody who didn't just make a film that could mean career suicide and throws Mother! into theaters like something he deviously expects to explode. If you've become bored with the standard crop of Hollywood or if you love movies or if you're just in the mood for a shock: GO. SEE. MOTHER!
|
During the evening hours, the 154th Brigade of the Syrian Arab Army Republican Guard – supported by Hezbollah and various Shiite paramilitaries – captured Kiffin village in northern Aleppo from Islamist rebels while Kurdish troops of the YPG and Syrian Democratic Forces (SDF) seized several kilometers of road along the strategic Gazianstep-Aleppo including the town of Deir Jamal. Reportedly, Kurdish fighters and Syrian troops have set up a joint checkpoint near Kiffin as to avoid skirmishes between these two factions.
Over the past weeks, Islamist rebel forces in northern Aleppo have lost tens of villages and more concerning for the Syrian opposition, insurgents have also had their main supply line to Aleppo city severed by advancing government troops. As to combat the YPG and SAA in northern Aleppo, Islamist rebel forces have initiated a coalition called ‘Jaish al-Halab’, which consists of Harakat Ahrar Al-Sham, the Free Syrian Army, Jabhat Al-Shamiyah, Jaysh Al-Islam, and Jaysh Al-Mujahiddeen.
Not long ago, a YPG official announced that Kurdish forces would launch a large-scale offensive in northern Aleppo as to connect Afrin with Kobane and Hasakah. Although no official treaties have been signed between Kurdish forces and government troops in the countryside of Aleppo, a non-aggression pact could be signed in the near future as both parties face common enemies – namely, ISIS and Islamist rebel groups in northern Aleppo.
|
It is known to provide a corrosion resistant synthetic resin coating on a concrete structure by applying a curable synthetic resin to the surface of the concrete, e.g. a concrete waste water tank.
The surface to be coated is subjected to a cleaning treatment, and the synthetic resin is applied to the cleaned surface to form the corrosion resistant coating.
The cleaning treatment can be accomplished by steps such as sand blasting, steam cleaning, the use of pressurized water jets, flame cleaning and by abrading process.
The synthetic resin or plastic typically comprises a polyester resin, an epoxide resin, a polyurethane resin, an acrylic resin, or the like. Preferably a polyester resin is used. One can apply the synthetic resin or plastic directly to the cleaned surface, for example by spraying. The corrosion resistant synthetic plastic resin coating can also be formed by rolling it or troweling it onto the surface.
Both thick and thin corrosion resistant synthetic resin coatings however have a poor adhesion which is time dependent and may loosen readily from the surface of the concrete structure.
We have discovered that the loosening of these corrosion resistant synthetic resin coatings may be due to moisture penetration. Concrete is, of course, impermeable to water in liquid form, but is permeable to water vapor. Diffusion processes, in which water in the vapor phase from the ground is transported through the wall of the concrete to the inside surfaces, appear to result directly in an accumulation of water at the interface between the corrosion resistant synthetic resin coating and the coated concrete surface.
The pressure behind the corrosion resistant synthetic resin coating so increases with time, that it eventually exceeds the strength of the coating on the concrete foundation, causing loosening, flaking, and peeling.
|
Transient eosinophilia by HIV infection.
We describe a case of early human immunodeficiency virus infection characterized by transient eosinophilia without an elevated immunoglobulin E concentration, allergic symptoms, or atopic dermatitis. Possible mechanisms of the eosinophilia are discussed.
|
Grape Juice & Jam Making Machine
Grape Pulp Making Machine offered find use in homes and hotels and helps in extracting pure juice by separating it from seeds, skins & pulp. With the machines available in different capacities, these are low in maintenance, efficient, durable to use. Providing for long lasting working support, it is best suitable for taking out pure juice from citrus fruits and features quick and efficient extracting process. Its stainless steel fabricated finish also makes these long lasting in use. Being easy to clean juicer, it can also be used for Oranges, Mosambi, Pineapple, Anar, Grapes, Sweet lemon and other fruits.
|
"resource/layout/steamrootdialog_musicpage_details.layout" {
styles {
CMusicPage_Details {
bgcolor=color__background
render {}
render_bg {}
}
}
layout {
place {
control=CMusicPage_Details_Content
width=max
height=max
}
}
}
|
Around same time as stabbing in Old City, Arab terrorist opens fire at sukkah in eastern part of the capital; none wounded.
Around the same time on Saturday night after Shabbat as a fatal terrorist attack took place in Jerusalem's Old City, a shooting attack took place in the eastern neighborhood of Nof Tzion in the capital.
An Arab terrorist opened fire at a sukkah, a festival booth Jews are commanded to dwell in during the Sukkot holiday that began last week.
The bullet pierced the wooden wall of the structure; fortunately no one was wounded in the attack.
Police have launched a manhunt after the terrorist.
In another attack just minutes prior to the shooting, a terrorist killed one man and wounded four other people in the Old City of Jerusalem.
The terrorist was himself fatally wounded, after being shot by security forces.
The flurry of attacks comes after senior Hamas official Mahmoud Zahar earlier on Saturday called for Arab residents of Jerusalem, Judea and Samaria to "mobilize" and "take up arms" in an open call for armed attacks against Jews.
Just last Thursday night a young couple was gunned down in front of the eyes of their four young children outside Itamar in Samaria, in an attack claimed by Palestinian Authority (PA) Chairman Mahmoud Abbas's Fatah faction.
|
Empirical review supporting the application of the "pain assessment as a social transaction" model in pediatrics.
Despite decades of research, national mandates, and widespread implementation of guidelines, recent reports suggest that the quality of pain assessment and management in hospitalized children remains suboptimal. The mismatch between what is advocated and what is done in practice has led experts to argue for a conceptual shift in thinking, where the pain assessment process is viewed from a complex social communication or transaction framework. This article examines the empirical evidence from the recent pediatric pain assessment and decision-making literature that supports adaptation of Schiavenato and Craig's "Pain Assessment as a Social Transaction" model in explaining pediatric acute pain management decisions. Multiple factors contributing to children's pain experiences and expressions are explored, and some of the difficulties interpreting their pain scores are exposed. Gaps in knowledge related to nurses' clinical pain management decisions are identified, and the importance of children's and parents' preferences and roles and the influence of risks and adverse events on decision making are identified. This review highlights the complexity of pediatric nurses' pain management decisions toward the clinical goal of improving comfort while minimizing risk. Further study evaluating the propositions related to nurses' decisions to intervene is needed in pediatric clinical settings to better synthesize this model for children.
|
CREATE TABLE special_posts (
id SERIAL PRIMARY KEY,
user_id INTEGER NOT NULL,
title VARCHAR NOT NULL
);
CREATE TABLE special_comments (
id SERIAL PRIMARY KEY,
special_post_id INTEGER NOT NULL
);
|
worldsio
The above images are high definition renders of the Worlds.io 3D environment and depict the current stylistic direction of the Worlds.io CORE World; one inside a private structure, and one outside in the hub of the CORE world. As the Worlds.io project continues to progress toward our planned Worlds.io network BETA in the coming weeks and months we’ll be releasing more and more sneak peeks of the client both in terms of style and functionality. We want you to get involved with the development of Worlds.io and help us to give you back control of your online experience; browsing, messaging and sharing.
The future of communications technology is closer than you think; are you ready?
What is Worlds.io?
Worlds.io is a private, peer to peer communications client which allows users to connect to a unique and customisable 3D/VR environment, including access to a fully functional HTML5 browser element we call WISP, and sitting on top of a fully encrypted network layer we call XIPP. Worlds.io is a versatile virtual reality compatible communications platform for the future.
For more information on Worlds.io please visit:
On Social Media:
Sign up for our mailing list for exclusive access to the Worlds.io BETA programme:
|
// diggit.py by @bl4de | 87ef00aec81fec4fb7b644d16669380956da9ebc content
<?php
// TODO
//$FLAG = '';
?>
|
/* Generated by RuntimeBrowser
Image: /System/Library/PrivateFrameworks/VectorKit.framework/VectorKit
*/
@interface VKImage : NSObject {
struct CGPoint {
double x;
double y;
} _anchorPoint;
struct CGRect {
struct CGPoint {
double x;
double y;
} origin;
struct CGSize {
double width;
double height;
} size;
} _collisionRect;
NSData * _data;
struct Texture2D { int (**x1)(); struct ResourceManager {} *x2; struct RenderResource {} *x3; int (**x4)(); char *x5; int x6; int x7; int x8; int x9; unsigned int x10; struct shared_ptr<const ggl::TextureDataAbstract> { struct TextureDataAbstract {} *x_11_1_1; struct __shared_weak_count {} *x_11_1_2; } x11; bool x12; bool x13; unsigned int x14; unsigned int x15; bool x16; struct shared_ptr<ggl::SamplerState> { struct SamplerState {} *x_17_1_1; struct __shared_weak_count {} *x_17_1_2; } x17; } * _gglTexture;
bool _hasAnchorPoint;
bool _hasCollisionRect;
unsigned char _imageHash;
struct CGImage { } * _imageRef;
NSString * _name;
VKResourceManager * _resourceManager;
double _scale;
struct CGSize {
double width;
double height;
} _size;
bool _usedAsTextureAndImage;
}
- (struct CGPoint { double x1; double x2; })anchorPoint;
- (struct CGRect { struct CGPoint { double x_1_1_1; double x_1_1_2; } x1; struct CGSize { double x_2_1_1; double x_2_1_2; } x2; })collisionRect;
- (int)compareTo:(id)arg1;
- (void)dealloc;
- (struct Texture2D { int (**x1)(); struct ResourceManager {} *x2; struct RenderResource {} *x3; int (**x4)(); char *x5; int x6; int x7; int x8; int x9; unsigned int x10; struct shared_ptr<const ggl::TextureDataAbstract> { struct TextureDataAbstract {} *x_11_1_1; struct __shared_weak_count {} *x_11_1_2; } x11; bool x12; bool x13; unsigned int x14; unsigned int x15; bool x16; struct shared_ptr<ggl::SamplerState> { struct SamplerState {} *x_17_1_1; struct __shared_weak_count {} *x_17_1_2; } x17; }*)gglTexture;
- (struct CGImage { }*)image;
- (id)initWithCGImage:(struct CGImage { }*)arg1 scale:(double)arg2;
- (id)initWithCGImage:(struct CGImage { }*)arg1 scale:(double)arg2 usedAsTextureAndImage:(bool)arg3;
- (id)initWithData:(id)arg1 scale:(double)arg2;
- (id)initWithData:(id)arg1 scale:(double)arg2 usedAsTextureAndImage:(bool)arg3;
- (id)initWithName:(id)arg1 scale:(double)arg2 resourceManager:(id)arg3;
- (double)scale;
- (void)setAnchorPoint:(struct CGPoint { double x1; double x2; })arg1;
- (void)setCollisionRect:(struct CGRect { struct CGPoint { double x_1_1_1; double x_1_1_2; } x1; struct CGSize { double x_2_1_1; double x_2_1_2; } x2; })arg1;
- (struct CGSize { double x1; double x2; })size;
@end
|
"Rubral" tremor due to midbrain Toxoplasma abscess.
We describe a patient with "rubral" tremor due to a Toxoplasma abscess of the midbrain. Despite treatment that was effective in promoting partial computed tomography resolution of the lesion, the tremor remained unchanged.
|
As computer science has evolved, object oriented programming has become one of many familiar models designers and programmers utilize to implement functionality within computer systems. The object model generally is defined by a class structure that includes class members providing both methods and associated data elements belonging to the class. The class members thus provide/define desired functionality within a computer program, wherein an object is declared as an instance of a particular class. As is commonplace, objects often must exchange data and/or invoke other objects operating on the same platform and/or communicate with objects belonging to remote platforms. In order to communicate between objects, interface systems and standards have been developed to define how objects may communicate and/or interact with one another.
A familiar system for communicating and interfacing between objects is known as the Component Object Model (COM), wherein another similar system is referred to as the Common Object Request Brokers Architecture (CORBA). Still yet other communication interfaces may be defined in languages such as JAVA within an operating framework of a Java Virtual Machine, for example. As these and other systems have been developed however, two common object architectures or models generally have emerged and may generally be defined in terms of managed and unmanaged object systems, for example.
Managed objects may be allocated from a heap within a managed software or execution environment and are generally not responsible for managing associated object lifetimes. Managed objects may be described in terms of a data type (e.g., metadata) and automatically collected (e.g., reclaimed) by a managed environment “garbage collector” that removes the object from memory when the object is no longer being accessed. In contrast, unmanaged objects may be allocated from a standard operating system heap, wherein the object itself is responsible for freeing memory it employs when references to the object no longer exist. This may be accomplished through well-known techniques such as reference counting, for example.
As described above, managed objects may be allocated from a managed heap and automatically garbage collected. In order to achieve this, references to managed objects are traced. In one example, reference counting can be used wherein a last reference to an object is removed, the garbage collector reclaims the memory occupied by the object mitigating the need to reference count managed objects. Yet in a Common Language Runtime (CLR), memory is not reclaimed until a garbage collector is run (e.g., which normally happens with a triggering of low resource conditions). Thus in general, a managed environment essentially handles garbage collection internally. Tracing is possible within managed code because the managed environment keeps track of outstanding references that exist on an object. As each new object reference is declared within managed code, the managed environment adds the reference to a list (e.g., building the list on the fly). At any given time, the managed environment, rather than the object itself, is thus aware of live references that exist on a given object. As references fall out of scope or change value, the list (built on the fly) is determined by knowing a combination of stack walking and how to inspect areas of memory owned by the garbage collector, and as long as a reference remains within managed code, the managed environment is able to trace it. Unfortunately, object references originating from unmanaged code present difficulties when interacting with a managed environment.
One difficulty associated with unmanaged references operating in a managed environment relates to that there is substantially no straightforward way for managed environments to trace references from unmanaged code to managed objects. Even if the managed environment were aware of these references, generally, no information is maintained indicating whether a reference is active or inactive. Thus, since unmanaged clients, for example, are written in unmanaged code, presently, there is not a process for tracing references that unmanaged objects may hold on managed objects executing within a managed environment. Similarly, originating calls from managed environments to unmanaged environments also presents problems relating to managing object lifetimes. For example, some unmanaged objects expect to be reference counted, but in a managed environment reference counting is not required for managed objects. It would thus be very confusing if developers that design managed code had to handle references to managed and unmanaged objects differently.
Along with object lifetime management problems described above, managed and unmanaged object systems generally differ in many other significant ways. These differences may include how the object systems provide object interfaces within the respective object systems, how data is structured and/or defined, and how errors and exceptions are handled, for example. Due to these and other differences between managed and unmanaged object systems, it is presently difficult, time consuming, and expensive in terms of development costs to have objects from an unmanaged system interface and interact with objects from a managed system and visa versa. Moreover, it is generally difficult for managed objects designed according to one object system framework to communicate with objects from an architecturally different managed system framework. This also applies to unmanaged object communications between diverse unmanaged system frameworks. Thus, programmers and developers have diverged based at least in part upon programming preferences relating to a managed or an unmanaged system (e.g., type instantiation in memory areas, garbage collection, pointing and reference to types, . . . ).
A classic paradigm relating to managed and unmanaged systems originates from a programming standpoint. Dependent upon a programmer, program language decisions differ based at least in part upon strengths and weaknesses of the language. Therefore, a programmer must take both benefits and detriments when choosing to program between a managed system and unmanaged system. Common Language Runtime (CLR) and C++ Standard are examples of a managed and unmanaged systems respectively, wherein each system delivers tailored benefits and detriments to the individual programmer. Thus, programmers have diverged based upon programming preferences (e.g., type instantiation in memory areas, garbage collection, pointing and reference to types . . . ) in relation to managed systems or unmanaged systems.
In particular, an unmanaged system allows a programmer to have leniency not available in a managed system such as freedom with type instantiation in memory areas; yet does not provide the benefit of garbage collection. For example, a C++ program provides distinction between definition of a type and how or where the type can be instantiated (e.g., producing a particular object from its class template, which can include allocation of a structure with the types specified by the template, and initialization of instance variables with either default values or those provided by a class constructor function). Thus, a C++ environment provides users with certain idioms that control where or where not a type is instantiated, but a definition of type itself does not control instantiation.
On the other hand, various compilers and other tools expose a managed system's functionality that enable designers to write code that benefits from a managed execution environment. Thus, code that is developed with a language compiler that targets a managed system such as, for example, a Common Language Runtime (CLR) is referred to as managed code. This type environment employs features such as, for example, garbage collection based on type, and caps (e.g., handles) to reference whole objects.
Managed and unmanaged systems such as, for example, C++ Standard and Common Language Runtime (CLR), have developed a divergence in programming preference based upon their individual strengths and weakness. Supporting the C++ Standard within the Common Language Runtime (CLR) unearthed various problems with compatibility and the existing standard. Extending the language became problematic and cumbersome. For example, programmers adopted the use of a double underscore in order to preface keywords for managed extensions to define, such as, garbage-collection classes and properties. Such characteristics, although conformed to C++ Standard, deterred programmers from managed systems based at least in part upon readability of code, comprehension, and a large learning curve.
In view of the above, there is a need to build upon the existing C++ Standard in order to improve upon performance utilizing Common Language Runtime (CLR). More particularly, there is a need to conform to C++ Standard within the Common Language Runtime (CLR) that is readable, yet does not interfere with existing code standards.
|
Q:
How to save the order for jQuery UI portlet plugin?
I am using the portlet plugin from jQuery UI
my question is:
is it possible to save the order of the portlets in the database so when the user come back he can see his portlets sorted in the same order?How?
Thanks
A:
I found the solution here
|
// RUN: %empty-directory(%t)
// RUN: %target-build-swift %s -module-name DefaultImplementation -emit-module -emit-module-path %t/
// RUN: %target-swift-symbolgraph-extract -module-name DefaultImplementation -I %t -pretty-print -output-dir %t
// RUN: %FileCheck %s --input-file %t/DefaultImplementation.symbols.json
public protocol P {
func foo()
func bar()
func baz()
}
extension P {
public func foo() {}
}
public extension P {
func bar() {}
}
public struct Outer: P {
// CHECK-DAG: "precise": "s:21DefaultImplementation1PPAAE3fooyyF::SYNTHESIZED::s:21DefaultImplementation5OuterV",
// CHECK-DAG: "precise": "s:21DefaultImplementation1PPAAE3baryyF::SYNTHESIZED::s:21DefaultImplementation5OuterV",
// CHECK-DAG: "precise": "s:21DefaultImplementation5OuterV3bazyyF",
public func baz() {}
}
extension Outer {
public struct Inner: P {
// CHECK-DAG: "precise": "s:21DefaultImplementation1PPAAE3fooyyF::SYNTHESIZED::s:21DefaultImplementation5OuterV5InnerV",
// CHECK-DAG: "precise": "s:21DefaultImplementation1PPAAE3baryyF::SYNTHESIZED::s:21DefaultImplementation5OuterV5InnerV",
// CHECK-DAG: "precise": "s:21DefaultImplementation5OuterV5InnerV3bazyyF"
public func baz() {}
}
}
extension Outer {
public struct FromExtension: P {
// CHECK-DAG: "precise": "s:21DefaultImplementation1PPAAE3fooyyF::SYNTHESIZED::s:21DefaultImplementation5OuterV13FromExtensionV"
// CHECK-DAG: "precise": "s:21DefaultImplementation1PPAAE3baryyF::SYNTHESIZED::s:21DefaultImplementation5OuterV13FromExtensionV"
// CHECK-DAG: "precise": "s:21DefaultImplementation5OuterV13FromExtensionV3bazyyF"
public func baz() {}
}
}
// CHECK-NOT: {{.*baz}}::SYNTHESIZED::
|
This invention concerns auto security systems designed to deter or prevent thefts of the vehicle.
Many such systems have been devised involving intrusion detectors which trigger various alarms, lock outs, kill switches, etc.
On board radio transmitters have also been devised to enable monitoring the position of a stolen vehicle by police authorities, typically by complex triangulation techniques, requiring elaborate equipment.
The arming of such systems typically requires a manual switch to be set, which often may be found by the thief and turned off.
Many times the switch is not set due to oversight or because the vehicle driver makes a short stop and does not feel arming the system is necessary, although many thefts occur in these instances.
|
We have visited many great sites in Europe we have stood on the floor of the colosseum in the moonlight in Rome we have prayed with his holiness the pope in St. Peter’s square thrown coins in the Trevi Fountain watched Totti score at the stadio olimpico . Stood in the pantheon
watching the rain fall through the hole in the dome. Looked up at the ceiling in the Sistine chapel in awe at Michelangelo’s masterpiece but this Tunnel beats all of that we both stood at the entrance and wept even the dogs loved it in fact I’m sure they spoke to us about what treats they wanted from the supermarket next door it’s a must if your visiting Bude it doesn’t disappoint magical
…
|
Loneliness in childhood: toward the next generation of assessment and research.
Loneliness is a sad, even painful emotional experience that is thought to result from deficiencies in the quantity or quality of one's social relationships. Assessments of loneliness have evolved to typically include diverse item content that assesses the causes of loneliness as well as the emotional experience of loneliness itself. This embedding of hypothesized causes in the assessment of loneliness creates pervasive problems in drawing valid conclusions from empirical research on loneliness. In this chapter, we review major historical and contemporary perspectives on loneliness and then describe how widely used assessments have led to the development of a literature in which key questions about the causes of loneliness, the influence of gender on the experience of loneliness, and the developmental course of loneliness remain unanswered. We argue for the use of loneliness assessments that focus purely on the emotional experience of loneliness without including hypothesized causes.
|
Have a Question?
The Black Brand Cheater helmets use a combination of multiple shell sizes and in-molded Composite Fusion Technology to give the smallest, safest DOT approved helmets around.These helmets will be a five-snap design so a wrap shield, bubble shield and visor will fit.
|
Surface plasmon resonance mass spectrometry for protein analysis.
The combination of surface plasmon pesonance (SPR) and mass spectrometry (MS) provides a unique methodology for studying proteins and their interactions. SPR is utilized to assess protein quantitative variations and the kinetic aspects of protein interactions, whereas MS complements the analysis by providing an exclusive look at the structural features of the interacting proteins via measurement of their mass. Thus, intrinsic protein structural modifications that go unregistered via the SPR detection can readily be assessed from the MS data. The purpose of this chapter is dissemination of the procedures and protocols for successful SPR-MS analysis. The individual steps of the complete SPRMS process are illustrated via analysis of cardiac troponin I (cTnI).
|
I don’t have a total for the amount raised, but I wouldn’t be surprised if we come close to $2k when everything is totaled. Thanks to everyone for their support and generosity. Big thanks to Phil C. for all his work helping to organize and run the event. Thanks to Dennis K. for donating the trophies and thanks to him and Tony K for the work they did to get the word out.
The big winner was Adam M. He got the double trophy bonus. Keri W. placed second and Robert H. placed third. Sorry for the terrible photo. Someone share a better one if you have it.
I somehow won B division. I’m more excited than I look in the photo. I think I was still a little shocked. David Z. placed second and Logan H. placed third.
|
Q:
Inheriting jQuery's Events Model
I'm developing an SDK for a site API which depends on jQuery and I'd like to utilize jQuery's custom events model within the SDK. How can I best inherit, wrap, or otherwise utilize jQuery's events without requiring an arbitrary DOM element to attach them to?
Current basic structure is below:
;(function($, global, undefined){
function MySDK(opts){
}
MySDK.prototype.on = function(evt, fn){};
MySDK.prototype.trigger = function(evt, data){};
if(global.MySDK){
throw new Error("MySDK has already been defined");
}else{
global.MySDK = MySDK;
}
})(jQuery, typeof window === "undefined" ? this : window);
A:
You can attach the events and listeners to the window object.
Example:
MySDK.prototype.trigger = function(evt, data) {
$(window).trigger(evt, data);
};
If you're writing javascript for others to consume, I'd also strongly recommend you look into sandboxing your framework by running it inside of a src-less iframe. All the better if each version SDK has it's own iframe.
|
Note: Javascript is disabled or is not supported by your browser. For this reason, some items on this page will be unavailable. For more information about this message, please visit this page: About CDC.gov.
Exposure interactions in occupational/environmental toxicology.
Interactions in occupational and environmental toxicology were described and discussed. The importance of evaluating the whole person when health professionals diagnose potential toxicity from occupational and/or environmental exposure was noted, and examples were provided. Combined exposures to toxic agents with subsequent interactions may result from the personal lifestyle of an individual, including drugs which the person may be taking. Chemical exposures may occur at home, and chemicals may enter the home by way of workplace contaminated clothing or other items brought home from work. Toxic exposures to chemical and physical agents and other modifying factors (for example, diurnal variations due to shift work or stress) must be taken into consideration. Combined agent interactions have not been as well studied in occupational/environmental medicine as in clinical medicine. Drug interactions are known to occur, and a similar effect could be seen with chemical exposures. Interactions may be antagonistic, additive, or synergistic, and the type of interaction may depend on the dose. Age, sex, and general health condition (coexisting diseases, immune status, or obesity) can affect the toxicity of an occupational exposure. Environmental conditions such as circadian cycles, seasonal changes, temperature, humidity, noise and stress can all affect chemical toxicity. The author concludes that various kinds of interactions must be evaluated by occupational/environmental health professionals as they diagnose potential toxicity, and that many diseases may be the result of complex interactions among a wide variety of exposures and modifying conditions.
|
using System;
namespace PlatoCore.Models.Badges
{
public interface IBadgeEntry : IBadge
{
IBadgeDetails Details { get; set; }
}
public class BadgeEntry : Badge, IBadgeEntry
{
public IBadgeDetails Details { get; set; } = new BadgeDetails();
public BadgeEntry(IBadge badge) :
base(badge.Name,
badge.Title,
badge.Description,
badge.BackgroundIconCss,
badge.IconCss,
badge.Level,
badge.Threshold,
badge.BonusPoints)
{
}
public BadgeEntry(IBadge badge, IBadgeDetails details) : this(badge)
{
Details = details;
}
}
}
|
Building a Solar Still
For some reason, when I was a kid, I made it my business to know as many bushcraft skills as I could possible learn. One of the first I picked up was actually from a young-adult fiction book called Deathwatch. In the book, the protagonist is being pursued through the desert and must rely on his survival knowledge to evade and finally dispatch his pursuer. One of the things that allowed the book’s hero to do this was a device called a solar still from which he “made” fresh water. The book did an inadequate job of describing the still so I was forced to beg and plead my uncle (a member of the ANG) out of a copy of the military’s survival manual.
As I held those pages in my hand reading about how to build a solar still I knew immediately that I had learned one of the most valuable survival skills possible.
A solar still is nothing as magical as perhaps stories of my childhood makes it seem. Simply put, it is a hole in the ground with a cup at the center and bottom of the hole. Over the hole plastic is draped and a small rock is placed in the center. The plastic is secured at the edges. Newer versions actually have a drinking tube from the cup to the user. Who has a drinking tube at a time like this?
The solar still works through properties of evaporation and condensation. The water in the air and in the ground evaporates and forms a mist which floats upwards. The plastic traps the mist and the water collects on the plastic until it becomes heavy enough to drip off the center and into the cup. This process can be amplified by placing moist plant material in the bottom of the hole as green plants transpire and release water through pores. If I understand correctly you can even place saltwater in the hole and the still will desalinate it as it evaporates.
It must be said that there are disadvantages to this system. For one, it takes a lot of energy to build one. For another, the water you gather is only in amounts that will barely keep you alive in most cases. In addition, it must stay put for some time (overnight is best) to allow it to work, so its hard to travel.
However, in dry climates or in areas where freshwater is hard to find the solar still provides a means to sustainable fresh drinking water.
Share this:
Like this:
LikeLoading...
Related
Author: Jason
Hi, I'm Jason Akers, the host of The Self-Sufficient Gardener Podcast and contributor to Backwoods Home Magazine, Backhome Magazine and of course...Save Our Skills! When I'm not trying to get my garden to grow or writing, I like to fish, hunt and shoot. If you would like to learn more about maintaining a self sufficient garden visit my website and checkout my gardening podcast on iTunes.
View all posts by Jason
|
MIGS – summarizing the evidence
Across Canada, there has been a growing demand for and use of MIGS. However, the direct and indirect costs of MIGS can be considerable, and coverage under the public health insurance plans is inconsistent across jurisdictions. Therefore, the aim of the health technology assessment (HTA) was to inform the optimal use, including appropriate patient selection and funding, of MIGS devices and procedures for adults with glaucoma.
|
Watch: Ranbir & Katrina fought like children at Jagga Jasoos song launch
Ranbir Kapoor and Katrina Kaif had most talked about link up of BTown. Though they never accepted the relationship, it was all obvious when they started living in together. But things went bad and they had a breakup soon. Post the breakup, they never came together and always dodged the questions about each other.
Now that Ranbir & Katrina’s much-delayed film Jagga Jasoos is finally releasing next month, they had to come together for promotions. Ranbir & Katrina were together for the first time post their breakup for the launch of new Jagga Jasoos song ‘Galti Se Mistake’. It was expected to be an exciting event as fans and media wanted to know what happens when the ex-flames come together.
To everyone’s shock, Ranbir & Katrina were supremely awkward with each other. Those who wanted to notice some hidden spark were left disappointed when they saw Ranbir & Kat were not even a bit comfortable with each other. So here is all that happened –
Ranbir & Katrina Were Not Interested In Sitting Next To Each Other
The awkwardness between Ranbir & Katrina was visible since very start when they were just swapping the seats, trying to avoid sitting next to each other. But they had to follow the order of Anurag Basu who hilariously said, I was told by a journalist to not sit between them. Have a look-
Pee Ke Aaya Hai Kya? Katrina Asked Ranbir
Ranbir was asked about his dancing capabilities and while answering the question he joked that Katrina has taken all the dance lessons from him and there’s no gratefulness on her side. Katrina who looked a bit shaken by Ranbir’s answer said, “Pee ke aaya hai kya? “. Checkout how Ranbir reacted-
Katrina Became Nervous On A Question
Katrina was totally taken aback and became nervous when a journalist asked her and Ranbir about a mistake that they would want to do again and again. When Katrina couldn’t find an answer, Ranbir (also the producer of Jagga Jasoos) told her that she needs to answer the question and can’t dodge it which embarrassed her even more. Have a look –
Tareef Ho Gayi Hai, Ab Zyada Ungli Mat Kar
Katrina was asked about her working experience with Ranbir which she again tried to dodge. To handle the situation, Ranbir quickly took the question on himself and started praising Katrina and her Boxoffice pull. After he answered the question, Katrina wanted to speak something but Ranbir interrupted her by saying, “Tareef ho gayi hai, Ab zyada ungli mat kar”. Have a look-
|
Sony laat weten dat de in de VS aangekondigde Playstation VR bundel niet naar Nederland komt. Er zijn in elk geval op dit moment geen plannen om een dergelijk pakket (waar naast de VR headset ook de benodigde Playstation Camera in zit) in Europa op de markt te brengen.
Dat betekent dat wie in oktober een PSVR headset aanschaft daar zelf nog de Playstation Camera en eventueel de Move controllers bij moet kopen. Zonder de camera werkt de headset helemaal niet.
|
With rapid development of wireless communications technologies and popularity of intelligent user terminals, an increasing number of user terminals can support a heterogeneous network. The heterogeneous network includes access networks of different standards. Communications standards may include a wireless cellular network, a wireless local area network (WLAN), a worldwide interoperability for microwave access (WiMAX) network, Bluetooth, infrared, and the like. User experience consistency can be improved by integrating access technologies of networks of multiple communications standards.
Currently, an integration solution to networks of multiple communications standards that is provided in the 3rd Generation Partnership Project (3GPP) is integration based on an Internet Protocol (IP) layer. In this integration solution, networks of multiple communications standards such as a cellular network and a WLAN network can be authorized and authenticated together. The cellular network can assist implementation of WLAN network discovery, and the WLAN network can implement offloading of some data in the cellular network.
However, in the foregoing solution, spectrum resources of networks of different communications standards cannot be comprehensively used. When a terminal has not accessed a network of a particular standard, or when a network of a particular standard has heavy load when sending network information of the network to a terminal, cooperation in terms of sending network information cannot be effectively implemented by using a network of another standard.
|
Interaction of intracellular proteases and immune mechanisms.
Intracellular proteases play an important role both in nonspecific and specific immune reactions. Results concerning the interaction of these enzymes with phagocytic factors responsible for killing microorganisms are presented. In inflammatory foci, proteases released from destroyed leukocytes have been found to modify the function of antibodies present. They particularly reduce their complement fixation activity. Macrophages with differing proteolytic activity demonstrated diverse effects on the formation of antibodies tested by Jerne's plaque technique in young rabbits immunized with sheep erythrocytes. Whereas alveolar macrophages diminished antigen immunogenicity, peritoneal macrophages enhanced it.
|
Tiger Reserves In India
Tiger Reserves in India
Tiger Reserves in India
There are many Tiger Reserves in India such as Jim Corbett National Park in Uttarakhand and kanha Tiger Reserve In Madhya Pradesh. Following is a list of Tiger reserves in India with total area and the name of the state they are situated in.
|
Final Fantasy XIV Beta Chronicles Invite
As experts and creators of this amazing Final Fantasy MMO Wiki, Square-Enix wants to invite you all to join in on another round of beta invites for Final Fantasy XIV: A Realm Reborn! Simply click the header above, or this link RIGHT HERE and apply to receive your beta code.
|
Meera’s Endless love for Imran Khan
Meera has fallen for IK, the controversial Lollywood actress said, “If he ever asked me to marry him, I would most definitely accept the offer. He is a very good-looking and educated man. I would most likely to see him as aPrime Minister of Pakistan in Naya Pakistan”.
The report said that PTI chief has rejected the proposal due to his political engagements and vision for the establishment of Naya Pakistan. “Can’t consider the proposal as I’m busy in the struggle for Naya Pakistan” the report said, while quoting PTI chief.
Upon listening to Imran Khan’s statement Meera has another valid deal to offer him. Recently, Meera was interviewed while attending the Quaid-i-Azam Trophy tournament at Lahore’s Qadhafi Stadium and when asked about her interest in Imran khan she said “I am willing to marry the cricketer-turned-politician”.
The whiz has created during one of his rallies, when Imran had lightheartedly said that one of the reasons he wanted his demands to be met urgently so that he could get married. Following the statement, a television channel had asked Meerawhether she would marry Imran if asked and her answers was all positive.
|
All posts tagged dentist
There are many unique locations that can be found in this country relevant to certain professions. This can include the dentist in Key Largo, an expert who may be locally based and has a home in the Keys, that small chain of islands that string out from the southernmost part of Florida. There is always a need for dental experts anywhere.
For the Keys these are largely found operating their own clinics, which can be found in towns here. The biggest key of course is Largo, and here there are any number of vital facilities that can serve the residents of the entire chain. The clinic is not equipped to handle the larger emergencies that might have hospitals here operate with helicopters or fast sea vessels.
In any case, those in pain and found in more remote locations in the Keys will often need some fast transport to clinics in Largo. There may be emergency hotlines that apply for clinics, especially those that serve emergency dental procedures. There are some procedures that are lifesaving in nature, especially those that involve accidents.
For the more normal needs of clients or patients, the family dentist can usually take care of these. It can include preventive med or processes that will help individuals know or be more aware of what they can do to prevent things like cavities and gingivitis. Often, good oral hygiene practiced regularly and daily will work.
However teeth and the oral apparatus is in constant use, and the pressures that are put on these often lead to dislocation and damage. The Keys have the same sets of dental concerns for patients as all places which have dental experts. Which means that the most advanced machines and processes are also available here.
These serve all the residents of surrounding islands and even those who are located on the mainland. This will be a thing is established and will have any number of experts on call. Those who are in need usually contact their own clinics to whom they regularly do business with.
That is a thing that works in the usual manner in all places. The island settings though will require other kinds of transports and also some scheduling that can be interrupted by things like storms. Those who get stranded on islands and need some kind of attention from dentists will have to suffer through these.
Usually the smallest of islands will not have complete facilities that include hospitals and clinics. They might not have other emergency equipment, and things like rescue for fire and floods are often provided by the large islands. Although folks in the more remote places are a bit marginalized a support system is in place here.
This means there are many options they can have. One of these is to have some services before there is need for emergency ones. This means that teeth are pulled out during the times when the weather is sunnier, especially for those remote residents. Pain is not something that anyone wants to court in this way.
There are various types of dentist out there and each of them have their own way of doing something. That is the reason why we have to explain what are the common things that we should always consider about.
All of us has a lot of things going on our mind. However, it does not suggest that we should get to it without having some problem in the process. Cosmetic dentist in Baltimore is somewhat a good way for us to consider those things out. If you are not certain to what you needs to be done, make some changes whenever that is quite possible.
Most of the time, we are not too sure with what are the things that are legit and what are those things that are not. If you find it hard to consider that, we need to somehow accomplish some few things to help us see what we need to do and hope that we are making the right process every single time. Do what you think is critical and it would be okay.
You should also be safe enough with the notions you could go about it. The most important part about the situation is to explain what kind of ideas that we have to carry on about and how important it might be. If you are not too sure with the position, we can surely help you with the problem and get to the basic of those thoughts too.
If you are not sure on what are the questions you should be asking, it will be better that we know what needs to be done and how we can go on with the fact too. You can go ahead and explain what we are putting some pressure into it. Always have yourself consider the notions and be sure that something is going to manage too.
Some recommendations will supply you with how we can manage about them. We tend to look for them without giving you with positive feedback. All of this is somewhat critical before you gain something out. The way you do something will somehow guide you with the way we are doing something. Of course, that would help us out too.
The pricing we know right now depends upon so many factors. If you are not willing to bargain with the price which you should be, then it is critical that you do some research first. The way you do that will help you with the what needs to be done and keep track with whatever the situation that you are in. For sure, that would make some differences too.
The pricing is a way to check which one is beneficial and how it will maximize the pattern we are carrying on about. All of us are holding into the point without putting the way we can manage them with ease and how it would not.
These are just some of the vital factors we can do and what are that kind of notion we tend to carry on whenever that is possible.
|
Q:
Joomla: Importance of pass by reference
What's different between
$user =& JFactory::getUser();
And
$user = JFactory::getUser();
In Joomla documents used from & JFactory::getUser(); What's the matter?
Can I use $user = JFactory::getUser(); instead of & JFactory::getUser(); ?
A:
I think it should be
$user = JFactory::getUser();
note :: should only be used to access static functions.
$user = &JFactory::getUser();
Which means the value is return by reference to the function, not a copy of the value, but can only be used that way if the function was defined that way.
|
General Welsh
He is the commander of the Allied Nations HQ outpost. In actuality, however, he is merely a public figurehead, with Agent Joyce running the show from behind the scenes.
He's a white old man with short grey hair, and he wears US Army uniform. His rank insignia on his shoulder suggests he's a Brigadier General. He gives you a mission to take over the Southern Caracas Outpost from the [[|Venezuela|Venezuelan Army]], before you start doing other jobs for the AN. He will also offer you to buy AN weapons and supplies.
|
Q:
Move Data from Oracle to SQL Server
I would like to copy parts of an Oracle DB to a SQL Server DB. I need to move the data because the Oracle box is being decommissioned. I only need the data for reference purposes so don't need indexes or stored procedures or contstaints, etc. All I need is the data.
I have a link to the Oracle DB in SQL Server. I have tested the following query, which seemed to work just fine:
select
*
into
NewTableName
from
linkedserver.OracleTable
I was wondering if there are any potential issues with using this approach?
A:
Using SSIS (sql integration services) may be a good alternative especially if your table names are the same on both servers. Use the import wizard via and it should create the destination tables for you and let you edit any mappings.
|
Q:
How to get the IP address from "docker-for-desktop" node?
I'm trying to get the IP address of the "docker-for-desktop" node.
I'm switching from minikube to docker-for-desktop because it doesn't require VirtualBox.
I created a service that exposes a NodePort. When I use minikube context, I'm able to reach the service via minikube's IP address. When I switch to docker-for-desktop context, I'm not able to reach the service because I don't know its IP address.
With minikube, I was able to do:
$ minikube ip
or even:
$ minikube service list
I'm not sure how to do that with docker-for-desktop.
I would expect to have a command that gives a docker-for-desktop IP address.
A:
Minikube is creating a virtual machine that has its own IP, but when using Docker for Mac, you use your own laptop, so where you were using the minikube ip you can now just use localhost. It's just simpler.
|
Cell signaling, gene expression, and metabolism are affected by cell-cell heterogeneity and random changes in the environment. The effects of such fluctuations on cell signaling and gene expression
...
|
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// WARNING: This file was auto-generated, any change will be overridden in next release. Please use configs/es6.conf.js then run "npm run convert". //
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
import {
Object3D,
Scene,
Camera
} from '../../../src/Three';
export class CSS3DObject extends Object3D {
constructor( element: HTMLElement );
element: HTMLElement;
onBeforeRender: (renderer: unknown, scene: Scene, camera: Camera) => void;
onAfterRender: (renderer: unknown, scene: Scene, camera: Camera) => void;
}
export class CSS3DSprite extends CSS3DObject {
constructor( element: HTMLElement );
}
export class CSS3DRenderer {
constructor();
domElement: HTMLElement;
getSize(): {width: number, height: number};
setSize( width: number, height: number ): void;
render( scene: Scene, camera: Camera ): void;
}
|
More inspections for poor performers.
The CQC is consulting on changes to its inspection model. The proposals would mean better use of data, more inspections for the worse performing services and greater patient involvement in inspections.
|
Q:
Finding lasview tool from LAStools within QGIS?
I am trying to make a DEM from a .las file.
I have installed the LAStools directory and have the plugin:
I am wanting to use the lasview algorithm, but I can't see it in the standard toolbox I installed. Is there a way to add more algorithms?
A:
I worked it out this morning - simple user error I had asked QGIS to look in the QGIS toolbox instead of lastools folder (Essentially I had gone layer to deep, thinking that I was wanting to look at the QGIS toolbox , however it looks at other files not just the QGIS toolbox)
|
Gadue's Dry Cleaning is a family-owned and operated dry cleaning company with six locations in Chittenden County, Vermont. Our passionate devotion to client service, combined with award-winning quality, has created a loyal customer base that spans the country.
|
As a key component of an LCD panel, a backlight module is mainly used for providing sufficient brightness and uniformly distributed light sources, to enable the LCD panel to display images. One or more LEDs are usually used as a light source of the backlight module. Optionally, a cold-cathode tube or other related structures can also be used as the light source of the backlight module. However, LEDs are widely used in typical LCDs because of the advantages of low energy consumption, long service life of LEDs.
In an LED backlight module, one lightbar is generally formed by soldering LED element(s) as light emitting unit(s) on a printed circuit board (PCB) by surface mount technology (SMT). If one of the LEDs is damaged or the chromaticity is not good (NG), the entire lightbar is required to be reworked in the PCI factory or scrapped. Additionally, because the damaged LED may not be able to be replaced in time, efficiency is reduced, and the reworking or scrapping and assembling directly affects manufacturing cost of LCDs.
|
Q:
Can I disable editing several forms by clicking one button
I have several forms in Oracle ApEx and I need to disable editing them when a button on certain form is performed. By disable editing I mean remove edit, create and delete buttons and make all fields not enterable. Is it possible?
A:
Create a dynamic action on click of your button.
Add a Hide actions, and nominate the buttons you want to hide, also nominate your fields. You can identify multiple fields/buttons at once using jQuery selector.
Note, this is a client-side setting. You should also include validations to ensure relevant users aren't submitting data that doesn't match your intended business rule.
|
Agenda
It is not a coincidence that finding short explanations for observations is central to research at OCCAM. After all, it is what William Occam's razor demands and what has been formalized in Ray Solomonoff's theory of universal induction a few decades ago.
In that sense, in a nutshell, research at OCCAM consists of trying to make universal induction tractable by building efficient data compression algorithms. Formally, algorithmic information theory is used to create a sound and general mathematical foundation. The representations gained by the compression algorithms are then to be used to guide grounded reasoning, concept acquisition and communication through language, to build an agent with common sense reasoning abilities. In our view, solving these problems would be a big step toward AGI.
|
Q:
Python Screen reading and compare with image
Hey I am pretty new to python, but I am looking for a possibility to compare my running application with an image and check if this image is displayed in the running application. And if yes I want to get the coords of the matching position. Is that possible?
I think its something with PIL with imagegrab or something but I am not really sure if that will work as intended.
A:
Consider using PIL and openCV for this job.
from PIL import ImageGrab
pil_img = ImageGrab.grab()
opencv_img = numpy.array(pil_img)
then use OpenCV to process the image to find sub-image you are looking for. See these that does what you are looking for, but even allows the image to be rotated, scaled, etc.
http://docs.opencv.org/doc/tutorials/features2d/feature_homography/feature_homography.html
http://docs.opencv.org/doc/tutorials/features2d/detection_of_planar_objects/detection_of_planar_objects.html
If you want to do this cross platform, then you will need to use wxWidgets to do the screengrab, see this
|
One Does Not Simply
one does not simply
take the quick way home to gallifrey
|
Kitchen and furnishings are made of grey wood fiberboard. Over the entire kitchen counter there is an oblong window section that emits light through a roof-mounted kitchen shelf in steel and glass. In the background a glimpse of the cubbyhole/reading corner.
|
Q:
Trying to delete Account Name on Case, keeps pulling in Contact's Account
I'm trying to delete the Account Name from a number of cases as it is incorrect. However, the Contact Name field is filled in (and we want to keep that contact) which automatically pulls in the Contact's Account into the Account Name field.
So I delete the Account Name, save, and then it magically reappears.
Any good way to get around this?
Thanks.
A:
A workaround would be to create a generic account that you could associate the case with. You can select an account different from the account on the contact but you cannot leave it null. See docs here.
|
The Tactical portion of the game is a fully developed reinvention of the classic XCOM gameplay. Many fun and engaging mechanics have been recoded into EXLCOM, while some of the shortcomings of previous titles have been replaced to create a better tactical experience.
One example of this is the removal of the pod activation system and it's replacement by an alertion system, where enemies communicate with each other and call in reinforcements if they spot you.
View screenshot in full resolution
|
New forms of work on the provision of paid services are being implemented in Volozhin region
In particular, employees of the culture center offer a trip to the holy places of Belarus
Several such tours have already taken place, in which people could get acquainted with the amazing and unexplored corners. In the St. Vvedensky women's stauropegic monastery, believers visited the service, learned about local ways and treated themselves to apples from their own garden.
|
The problem of revealing accurate statistics about a population while maintaining privacy of individuals is extensively studied in several related disciplines. Statisticians, information security experts, and computational theory researchers, to name a few, have produced extensive bodies of work regarding privacy preservation.
Still the need to improve our ability to control the dissemination of potentially private information is driven home by an incessant rhythm of data breaches, data leaks, and privacy exposure. History has shown that both public and private sector organizations are not immune to loss of control over data due to lax handling, incidental leakage, or adversarial breaches. Prudent organizations should consider the sensitive nature of network security data and network operations performance data recorded as logged events. These logged events often contain data elements that are directly correlated with sensitive information about people and their activities -- often at the same level of detail as sensor data.
Privacy preserving data publication has the potential to support reproducibility and exploration of new analytic techniques for network security. Providing sanitized data sets de-couples privacy protection efforts from analytic research. De-coupling privacy protections from analytical capabilities enables specialists to tease out the information and knowledge hidden in high dimensional data, while, at the same time, providing some degree of assurance that people's private information is not exposed unnecessarily.
In this research we propose methods that support a risk based approach to privacy preserving data publication for network security data. Our main research objective is the design and implementation of technical methods to support the appropriate release of network security data so it can be utilized to develop new analytic methods in an ethical manner. Our intent is to produce a database which holds network security data representative of a contextualized network and people's interaction with the network mid-points and end-points without the problems of identifiability.
en_US
dc.format.medium
ETD
en_US
dc.publisher
Virginia Tech
en_US
dc.rights
This item is protected by copyright and/or related rights. Some uses of this item may be deemed fair and permitted by law even without permission from the rights holder(s), or the rights holder(s) may have licensed the work for use under certain conditions. For other uses you need to obtain permission from the rights holder(s).
|
Ben Finney wrote:
> Instead, you're being asked only to determine which category a file
> belongs to; and those categories are (modulo some historical quirks,
> due to David's obvious strong preference for the C-language-focussed
> ‘autoconf’) mostly about the *purpose* of a file — precisely to allow
> that determination to be made without the same person needing to know
> about install locations.
>
I've just found out that cabal ("distutils for haskell") supports most
of those options, BTW:
http://www.haskell.org/cabal/release/latest/doc/users-guide/builders.html#setup-configure-paths
And haskell is not really a C-language-focused language :) I don't know
anything about haskell, but it may be interesting to look at how they
are doing things,
David
|
Q:
Is it possible to use Android scripts created with ASE as typical application for Android (e.g. written in Java)?
I am very very new to Android. I was encouraged to take a closer look at Android when I heard about possbility to write applications on Android in scripting languages like Python. This sounds great and in fact works great.
I did some experiments and everything looks very interesting. I have noticed that I can either write my scripts on Android or create script file on my computer and then copy them to Android ase/scripts folder. This is somehow different (as far as I know) from process of creating application for Android in Java (when you create code, compile it to .apk and install on Android).
To be more specific I want to know:
what are limitations (if any) of script-based applications on Android?
is it possible to ship apps written in scripitng languages to Android Market and let other users install them without requirement to install ASE?
is there some way to create more complicated, multi-file projects in scripting languages on Android?
Thanks for any hints. Also please feel free to correct me if I made any error or wrong assumption in my question - as I wrote, I am very new to Android.
A:
what are limitations (if any) of
script-based applications on Android?
I would flip the question around. Scripts can only execute what is native to their language plus the things exposed by the Android facade. As such, you are not creating full user interfaces and the like -- at most, you have access to some pre-packaged dialogs (e.g., getPassword()). So, for scripting purposes, ASE is very slick, but you are not creating applications, IMHO.
is it possible to ship apps written in
scripitng languages to Android Market
and let other users install them
without requirement to install ASE?
Not presently. It is something that is being worked on.
is there some way to create more
complicated, multi-file projects in
scripting languages on Android?
Ummmm...you could try whatever sort of "include" construct there is in your language of choice.
|
Glenn Grothman and Dan Kohl battle over who’s the real politician
With a month until election day, Republican U.S. Rep. Glenn Grothman and Democrat Dan Kohl are swapping jabs about who is a career politician. Grothman is seeking a third term in the 6th Congressional District, a historically Republican district. But Kohl is betting on a Wisconsin blue wave. > Milwaukee Journal Sentinel
|
More About TALI.JOY
Recipes I've Shared:
So I made this one morning for breakfast and I loved it so much that I had to post it as a recipe for others to try. It is relatively healthy but is not so low in calories... but it's not super high either.
|
Tropical Discus Fish – Friend or Foe
Getting started can be quite intimidating if you believe all the “negative press” that discus fish receive. But the truth is that you can be very successful if you just follow a few simple guidelines. Make certain you are feeding your discus properly. They are big eaters.
The amateur aquarist has long had a love hate relationship with the Discus fish, these fickle beauties can be the best or worst endeavor you have in the freshwater world. There are quite a few things that will make your new project much likelier to be a success, and knowing these few tidbits of handy information will keep you from giving a few hundred bucks worth of fish the traditional “burial at sea.”
The first thing you should know is that Discus fish obey a social pecking order, and the more fish in a tank the better off you are, because the pecking will be distributed over more fish and there is less likely to be on fish bearing the brunt of being the whipping boy. You will also need a larger tank, because Discus will need room to roam, I like the ninety to one hundred and fifty gallon range. Another good thing to know is that Discus like their water refreshed every week, about twenty five percent or so will do every week. For whatever reason, they crave a water change and I have been told you cannot give them too much fresh water.
Another handy tip to keep in mind is not to put any other fish in the tank, save a good Pleco or a small school of tetras. Discus do not share tanks well and many fish will rip apart these gentle animals. Get your stock from a good reputable breeder, the pet store is usually a bad idea as they are not going to be able to guarantee such an expensive animal and you have no clue how healthy or otherwise the fish are. Start with a good school of about ten or fifteen, and build up should you have room. You may lose some, but there will be enough to keep them all happy together, they love a crowd, especially the young ones. They like their water warm and look into their current PH needs.
Many people believe you must be a master aquarist to own Discus, but that is simply not the case today. Modern hybrids are far hardier than the counterparts of yesteryear, and more is known about them today than ever before, giving a wealth of knowledge to our community. Do some digging and see what you can learn, you may have the setup to get an amazing tank going and not even know it.
|
Q:
Python get docstring without params
How I can retrieve the docstring from a function without additional params?
def foo(user, id):
"""
Description
:param user: username
:param id: id
:return: bar
"""
pass
For the doc I can use foo.__doc__ but the string include also :param: and :return:. How I can get only the function description?
A:
You can't.
You could get the full docstring and then use some regex to remove the params or retrieve only the non-param text. But this is somewhat impossible to do unless you know how the docstring is formated.
|
[Therapy of chronic pancreatitis].
Treatment of chronic pancreatitis is dependend on the stage of the disease and its complications. Pain therapy should be based on the knowledge of various causes of pain. In therapy of complications such as bile duct or pancreatic duct strictures interventional endoscopy is usually the first choice followed by surgery. Exocrine insufficiency is treated by porcine pancreatic extracts, endocrine insufficiency by insulin. One has to apply various imaging procedures such as sonography, MRCP, ERCP, endosonography, CT for exact diagnosis of complications and planning various therapeutic strategies. Pseudocysts may be drained via the transgastric, transduodenal, transpapillary or transcutaneous route. Distal prepapillary stenosis of the main pancreatic duct and bile duct stenoses can be drained by stents. Pancreatic duct stones can be desintegrated by shock waves and removed by endoscopy. Early diagnosis of pancreatic carcinoma as a potential complication of long standing inflammation of the pancreas remains an unsolved problem.
|
Exosomes and extracellular vesicles: the path forward.
Over the course of the past several decades, the concept that extracellular vesicles, exosomes and microvesicles, operate as cellular "housekeepers" and as agents for communication between and among cells and tissues, has emerged into one of the most promising yet vexing problems facing the biomedical community. Already, extracellular vesicles from biological fluids are being used for diagnostic purposes and hopes abound for their use as therapeutic agents. However, the most basic mechanistic questions surrounding their biogenesis and function in cellular and tissue homeostasis remain largely unexplored. In this issue of Essays in Biochemistry, the rise of a new intercellular communications pathway is considered from many perspectives-cell biology, physiology, and pathophysiology.
|
By default, the Tag property is set to an empty string (""). You can use this property to assign any string to an object without affecting it in any way. Unlike other properties, the value of the Tag property is not used by Visual FoxPro.
|
Q:
Map Reduce job design
Hi I have a large data set like this
cp1 -> List(P1,P2,P3)
cp2 -> List(P4,P5,P6)
cp3 -> List(P7,P8,P9)
cp4 -> List(P10,P11,P12)
cp5 -> List(P13,P14,P15)
I would like to write a MR job which could yield the following output. So the values would be same for all the keys.
p3 -> List(cp1,cp2,cp3,cp4,cp5)
p6 -> List(cp1,cp2,cp3,cp4,cp5)
p9 -> List(cp1,cp2,cp3,cp4,cp5)
p12 -> List(cp1,cp2,cp3,cp4,cp5)
p15 -> List(cp1,cp2,cp3,cp4,cp5)
Can any one help me with the design for this
Thanks
DM
A:
You can do something like this:
generate output from each map like this: (with any key but same for each line)
SOMEKEY P3 cp1
SOMEKEY P6 cp2
SOMEKEY P9 cp3
...
In reducer you will get only one key:
SOMEKEY (P3 cp1) (P6 cp2) (p9 cp3) ..
build the list out the cp1,cp2, cp3. After that its easy to emit keys in your desired format
p3 -> List(cp1,cp2,cp3,cp4,cp5)
p6 -> List(cp1,cp2,cp3,cp4,cp5)
...
Let me know if you need the code as well.
|
Q:
How to write Regular expressions in asp.net? for Email Validator?
I want to know the General formula for Writing Regular Expression? Any article?
A:
There isn't really a general formula. Regex is a non-trivial language for matching strings. There are plenty of books and tutorials available.
One of the better ways of learning regex is to use a piece of regex designer software, like this one.
Regexes for emails are tricky, but there are some good ones here: http://regexlib.com/DisplayPatterns.aspx
|
Lyrics
Who would have ever thoughtThe day could ever comeWhen we would seeA love like this fall into pieces
And it hurts me to know that now 'til thenI'll only have these memoriesAnd now there's no time left to pretendAnd it feels like it's the endBut you're always in my heartUntil we meet again
Now I have to let you goThere's no way we can be friendsBut you're always part of meUntil we meet again
Why while our love was strongWe still couldn't make itDid time have to take our live in different directionsAnd it hurts cause there's no way for me to reach youWe're so far apartWhen did we grow so far apart
And now there's no time left to pretendAnd it feels like it's the endBut you're always in my heartUntil we meet again
|
Q:
Can't connect with PHP to my bplaced.net Mysql database (no error)
I want to send some parameters from an HTML file with Ajax (jQuery) to my PHP file, which is also on the bplaced.net server. Near to everything is fine, my Ajax method sends the parameters to the PHP file, the PHP file receives them and is also connected with my Mysql database. The only problem when I try to insert in a table of the database nothing happens (no faults) table is still empty.
<?php
header('Access-Control-Allow-Origin: *');
// Verbindung herstellen //
@$verbindung = mysql_connect("localhost","username","password","database");
//Variablen
$a1 = $_POST["a1"];
$a2 = $_POST["a2"];
$a3 = $_POST["a3"];
$a4 = $_POST["a4"];
$a5 = $_POST["a5"];
$a6 = $_POST["a6"];
$a7 = $_POST["a7"];
$a8 = $_POST["a8"];
$a9 = $_POST["a9"];
$a10 = $_POST["a10"];
$a11 = $_POST["a11"];
$a12 = $_POST["a12"];
$a13 = $_POST["a13"];
$a14 = $_POST["a14"];
$a15 = $_POST["a15"];
$a16 = $_POST["a16"];
$a17 = $_POST["a17"];
$a18 = $_POST["a18"];
$a19 = $_POST["a19"];
$a20 = $_POST["a20"];
$a21 = $_POST["a21"];
$a22 = $_POST["a22"];
$a23 = $_POST["a23"];
$a24 = $_POST["a24"];
$a25 = $_POST["a25"];
$a26 = $_POST["a26"];
$a27 = $_POST["a27"];
$a28 = $_POST["a28"];
$a29 = $_POST["a29"];
$a30 = $_POST["a30"];
$a31 = $_POST["a31"];
$a32 = $_POST["a32"];
$a33 = $_POST["a33"];
$a34 = $_POST["a34"];
$a35 = $_POST["a35"];
$a36 = $_POST["a36"];
// Einfügen
$eintrag = "INSERT INTO test (name) VALUES ('tim')";
$eintragen = mysql_query($eintrag);
if($eintragen) {
echo "Eintrag war erfolgreich";
} else {
echo "Fehler beim Speichern";
}
mysql_close($verbindung);
?>
It echoes: "Fehler beim Speichern".
(PS: The other variables are not yet in use).
A:
Use this code to find out if the Connection is ok:
try {
$verbindung = mysql_connect("localhost","username","password","database");
} catch (Exception $e) {
echo 'Exception vorhanden: ', $e->getMessage(), "\n";
}
// Code fortsetzen
The Same with this piece of code to find out if your insert is working:
Try { $eintragen = mysql_query($eintrag);}
|
Mermaid Wand | Blue
Having a magical mermaid themed party? This mermaid wand lets you be the magical mermaid princess of the party. It's the perfect accessory to any kid's mermaid costume or simply for playing dress-up. Pair it with our Mermaid Mystic Headband to complete the look.
|
The new Loblaw grocery store chain flagship boasts a five-metre-tall wall of cheese, a sushi market and a walk-in wine room.
“I don’t know how much (Loblaw) bought the building for but I’m confident they’ll make their money back quickly,” former Toronto mayor John Sewell said.
Sewell, a founding member of the now-defunct Friends of Maple Leaf Gardens, is one of many who had been concerned the heart and soul of the iconic building – hockey – would be lost. But that concern, he said, has eased.
“The upper tier of the building has been converted into a hockey-specific arena for the Ryerson Rams,” Sewell said. “I think it’s great that a team will still call this place home.
“Hockey is still very much a part of the building’s history.”
Kourdah agreed.
“I’m a huge Leafs fan and I love the history of this place,” he said. “It’s like shopping in a museum. It’s great.”
|
The Object of Labor: Commodification in Socialist Hungary
Did socialist policies leave the economies of Eastern Europe unprepared for current privatization efforts? Under communist rule, were rural villages truly left untouched by capitalism? In this historical ethnography of rural Hungary, Martha Lamplandargues not only that the transition to capitalism was well under way by the 1930s, but that socialist policies themselves played a crucial role in the development of capitalism by transforming conceptions of time, money, and labor. Exploring the effects of social change thrust upon communities against their will, Lampland examines the history of agrarian labor in Hungary from World War I to the early 1980s. She shows that rural workers had long been subject to strict state policies similar to those imposed by collectivization. Since the values of privatization and individualism associated with capitalism characterized rural Hungarian life both prior to and throughout the socialist period, capitalist ideologies of work and...
|
import { h, render } from 'preact'
import App from './App'
const node = document.getElementById('app')
render(<App />, node!, node!.lastChild as Element)
// Hot Module Replacement
if (module.hot) {
module.hot.accept()
}
|
Plans have been unveiled for a pedestrian and cyclist bridge to stretch over the river in Brisbane’s west.
Brisbane City Council revealed the plans for stage one of the Indooroopilly bikeway on Tuesday, including the "critical link" between the Western Freeway Bikeway, the University of Queensland and Brisbane River Loop.
Design plans for stage one of the Indooroopilly bikeway. Credit:Brisbane City Council
The council’s public and active transport chairman Adrian Schrinner said the bikeway would include a cycling and pedestrian bridge over the Brisbane River.
“The Indooroopilly bikeway project will stretch from the existing Western Freeway Bikeway at Witton Road onto a new cycling and pedestrian bridge over the river, through Witton Barracks and along Lambert Road to connect with the UQ Bikeway,” Cr Schrinner said.
|
Plastic process equipment used in chemical plants and steel mills, such as pickle tank covers, pickle and other end use tanks, duct work, fume hoods, etc., generally is fabricated from materials, such as polypropylene plastic, which have good resistance to chemical attack and which are relatively inexpensive. However, in many such applications, the relatively high combustibility of regular or non-flame retardant polypropylene is a significant drawback.
To reduce the chance of combustion, it is possible to fabricate plastic process equipment completely of flame retardant plastic materials, such as polypropylene materials. On the other hand, such flame retardant materials are far more expensive than regular or non-flame retardant plastic materials and, in addition, flame-retardant materials are far more difficult to weld than non-flame retardant materials.
|
* {{{rel_name}}} is no longer used for {{{ManyToManyField}}}s. If your model has more than one {{{ManyToManyField}}} to the same foreign model, differentiate the fields using the field name, not {{{rel_name}}}. Also, give both of the {{{ManyToManyField}}}s a {{{singular}}} attribute, which defines the name of the related object in singular format. (This is an obscure case, but it's included here for completeness.)
|
Q:
What's the simplest way to efficiently backup and especially undo UPDATE operations in a MySQL db?
I figured it would be easy to just insert a new row in some sort of history table using PHP, (containing date, table, column, value etc) on each UPDATE operation, but having MySQL do that automatically in some way would be way more efficient.
Also, the restoring part could be simply a (quite unefficient) PHP script, unless it could be done with a single query (not sure how)
Thanks in advance
A:
MySQL Reference Manual :: Using Triggers
|
Epidemic
In epidemiology, an epidemic (from Greek epi- upon + demos people) occurs when new cases of a certain disease, in a given human population, and during a given period, substantially exceed what is "expected," based on recent experience (the number of new cases in the population during a specified period of time is called the "incidence rate"). (An epizootic is the analogous circumstance within an animal population.) In recent usages, the disease is not required to be communicable; examples include cancer or heart disease.
|
An artificial neural network approach to ERP classification.
Artificial neural network-based approaches were developed to classify event-related potential (ERP) waveforms. The networks utilized scalp-recorded ERP returns from six electrode sites. These ERPs were evoked as one individual responded to a series of auditorily presented object names while viewing various objects on a computer screen. The ERPs at the electrode sites were classified as a match decision or a no-match decision. A three-layer backpropagation neural network model was selected to formulate a global and a local classification approach. The backpropagation network in the global approach was designed to operate on a single ERP response which was the average of the ERP responses generated at the six electrode sites. The local ERP classification system consisted of six three-layer backpropagation networks. Each network was designed to operate on the ERPs generated at a single electrode site. A small data base consisting of eight match and eight no-match ERP responses was used to train and test the networks in a variety of ways. The results obtained clearly show that the neural network-based classifiers are able to discriminate with a high degree of accuracy between match and no-match conditions in ERP waveforms.
|
Introduced in
Last appearance
Contents
Appearance
First Phone
The original phone is a walkie-talkie with a headset, powered by batteries taped to the back of the phone and connected to two wires. Presumably, it was made by Jake. There is also a number pad to dial phone numbers, as well as up and down arrows to scroll through his contact list. So far, it has only appeared in five episodes:
Second Phone
Jake's video phone is black with a red line at the side. It resembles a modern flip phone. Along with Finn and Jake's radios and table phones, this one has never been used much, except in "Return to the Nightosphere" and "Daddy's Little Monster." It was acquired seemingly sometime before "Return to the Nightosphere." During the visit to the Nightosphere, he has his phone operated to film the whole ground to mark his journey with Finn. The phone has recorded three files before running out of battery:
The first one was in their house while introducing the video phone.
The second one was in the Nightosphere. Right after Hunson Abadeer gave Marceline his amulet to join the family business, she, along with Finn, played the Not Just Your Little Girl song. Unfortunately, Marceline wore the Nightosphere amulet when she finished the song with Finn, turning her into a monster similar to her dad's transformation. Jake and Finn were not strong enough to deal with her, so they passed out after a strong hit from a tentacle.
The last one was filmed during their way to the jail, checked by Finn when he told Jake there was another file. The Nightosphere Jailer, who spit bananas from his ears, was the reason why they both woke up on a bunch of bananas. Jake then threw the banana away before eating it.
Third Phone
His third phone seems to be also a flip phone, similar to Jake's video phone. This phone makes an appearance in "Pajama Wars," where Jake uses it to contact Finn to know about his 'walk' with Princess Bubblegum during the sleepover party.
The phone has a back and front camera feature, and has a mini-screen at the back. It can send and receive pictures and videos as shown where Finn sends selfies of himself with Princess Bubblegum, and when Jake sends selfies of himself.
|
I’ve been annoyed by the recent smattering of new dads in my area who are strutting around with babies attached to their bodies, dog in hand and grin on face. Mind you, most of these dads are doing this during the weekends like a show of how amazing they are at parenting. I know of the phenomenon of stay at home dads and the shattering of old gender norms. But do men REALLY want to be fathers? And why? I hear theories that women coerce their husbands to become fathers–coaxing them they will love their children when they’re born, and tricking them with pricked condoms and dishonesty about birth control for the truly resistant ones (Be careful, men!). Is it because the media is cracking down on men now to start families–with aggressive marketing on family friendly vehicles with commercials featuring serene dads? Do men feel they will be less insignificant than their childed counterparts if they don’t pass on their genes (in society’s eyes?)
I don’t know the answers to this, because clearly, I’m not a man and my fiancee is a woman. Yet, I’m intrigued that I expect there to be as many (if not more) of childfree men than women, yet their voices are not heard. Men being childless throughout history has been notoriously accepted in society, but of late, it seems the right and social media have taken up to convince and entice men into fatherhood. So where are the childfree men? And their voices?
Another real reason guys choose not to have children? Simply put, they just do not have the desire to raise children. They don’t want parenthood to be the central theme of their lives or their lifestyle. It is time that more of the real deal on childfree guys is talked about, not through a veil of “unconscious want” that women are supposed to help them realize and resolve, likely for their own motives to wanting children. -Laura Carroll
|
9135310E
Product Description
The Info Panel is a backlit panel that can be used with a 2N Helios Vario Series VoIP Intercom/Door Controller to present instructions, a telephone directory with keypad, display modules, company logos and other useful point of entry information.
|
“A proposed rule from the White House would make it harder for legal immigrants to get green cards if they have received certain kinds of public assistance — including Medicaid, food stamps and housing subsidies. Green cards allow them to live and work permanently in the United States.
“Trump administration officials say the policy would promote “immigrant self-sufficiency and protect finite resources.” Critics say it could have serious public health consequences.
“Officials such as California Attorney General Xavier Becerra, who has frequently clashed with the White House, are weighing challenges to the rule. ‘The Trump Administration’s proposal punishes hard-working immigrant families — even targeting children who are citizens — for utilizing programs that provide basic nutrition and healthcare. This is an assault on our families and our communities,’ Becerra said in a statement.
“But these actions depend on the final shape of the regulation, which could change through the rule-making process.”
|
Abstract
The influence of external circuit parameters on the measured current‐voltage behavior of double barrier resonant tunneling structures is studied both experimentally and through modeling. It is demonstrated that characteristic ‘‘plateaulike’’ structures, which often appear in the region of negative differential resistance, can be accounted for in terms of the oscillating nature of the circuit, given that only average currents and voltages are monitored.
|
Q:
How to get the day (Mon, tue, etc... Not a number) of the computer's clock?
I want to get the day of my computer, but in a word instead of a number. How do I do this?
A:
Use:
string day = DateTime.Now.DayOfWeek.ToString();
Here is the MSDN Reference.
|
Difficult aortic stump closure.
A technique is described for closure of the distal part of the aorta during aortofemoral reconstruction. With this technique, the inferior mesenteric artery may be revascularized locally in many situations, eliminating the need for reimplantation. The closure of the difficult aortic stump may be facilitated. Direct removal of calcified atheromatous plaque under direct vision obviates the need for heavy needles or for special vascular punches. In turn, this may reduce the potential risk of distal embolism and facilitates hemostatic closure of the excluded aortic segment.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.